Introducing the Keg, Rusty Surfboards latest model.

The Keg is a stout brew designed by Rusty Preisendorfer and Wade Carmichael. Its most distinct feature is the high nose and tail rocker as well as the apple core black stringer. The Keg is the Pro model for Wade Carmichael and his go-to board competing in the WSL. 

Now available for custom orders with direct and low-cost shipping across Europe.

Lets break it down:

The bottom features a fairly deep concave through the board. The deepest point is a third of the way up from the block. Rusty typically measures tail blocks 1 inch up so he can get a more consistent read meaning that the measurement is not as affected by the overall tail curve.

The Keg measures in at a hearty 7.8 inches one inch up. That's almost an inch wider than most typical high performance short boards. The foil is shifted back. On most of Rusty's boards he prefers a neutral foil or 0.1 inch more in the rear of the board. The Keg is 0.2 inches thicker than the nose. Significant.

Wade's dims on his weapon of choice out of the rack for most conditions is 6'0. Slightly bigger than average because Wade is an all-Australian bloke, built from Young Henry's lagers and steak and veggies. 19.5 wide, 2.55 inches thick and 31 liters of frosty volume.

Built for conditions all over the world, from point breaks, beachies, punchy slabs and everything in between.

We can't promise you that you're going to be able to throw as much spray as Wade does but at least with this board under your feet you'll know it's your fault and not the board.

FEATURES & SUITABILITY

Fin Setup Thurster
Fin System FCSII / Futures
Tail Type Round Square
Concave Deep single concave
Nose Rocker High entry
Tail Rocker High exit
Glassing 4 oz + 4 oz deck - 4 oz bottom
Ability Intermediate, Advanced, Professional
Wave Type All types of waves
Wave Size 0,5-3m

See The Keg details.

Custom order The Keg.