pu stringer

This is your most common standard stock surfboard: using a Polyurethane (PU) foam blank with a plywood stringer. After shaped, it is glassed using a polyester resin with two layers of four ounce fibreglass on the deck and one layer of four ounce fibreglass on the bottom.

Usually added after that, some carbon fibre or patches of four ounce fibreglass to wrap around the tail to prevent the rail/tail from crushing or denting severely (commonly known as 'tail cancer'). This technology is great for everyday use and has performance in all types of conditions and wave sizes and levels of surfer.

back to technologies